Bio Strip WB Concentrate Biodegradable water-based form release concentrate
Bio Strip WB Concentrate is a 100% biodegradable, chemical release agent emulsion concentrates that when properly diluted with water (4 to 1) provides a positive release ideal for sensitive environmental situations such as bridge formwork over rivers and streams or potable water reservoirs.
Bio Strip WB Concentrate provides quick, easy release on wood, steel, aluminum, elastomeric liners and leaves an architectural bondable concrete surface.
Features & Benefits
- Odorless
- No petroleum distillates
- Non-staining
- Environmentally friendly
- VOC-compliant
- Economical concentrate – just add water
- Biodegradable
Application
For optimal results, Bio-Strip WB Concentrate should be diluted and mixed properly, then applied with a sprayer, brush, or roller in a thin, uniform film to a clean form surface. The most effective method is spray application. Avoid ponding or puddling. Specific application rates vary by material:
- Steel, Plastic, Fiberglass: 1,500 sq ft/gal
- Aluminum, HDO Plywood: 1,500 sq ft/gal
- Elastomeric Form Liners: 1,500 sq ft/gal
- MDO Plywood: 1,000 sq ft/gal
- Urethane Coated Plywood: 1,000 sq ft/gal
- Coated Paper Forms: 1,000 sq ft/gal
- Dimensional Lumber: 750 sq ft/gal
- Rough Sawn Lumber: 750 sq ft/gal
- Striated Plywood: 750 sq ft/gal
Mixing Instructions: Stir slowly and thoroughly before each use using slow-speed mixing equipment. Dilute with 4 parts clean, potable water to 1 part concentrate. Mix well before every use.
Packaging
Available in 275-gallon totes, 55-gallon drums, and 5-gallon pails.
Shelf Life
One year from the date of manufacture, when stored in the original tightly closed containers.
Standards
- Corps of Engineers CEGS-03300, Section 10.8 Form Coating
- Navy Dock and Piers 56359
- 100% Biodegradable
Cleaning
Application equipment can be easily cleaned with water.