This hydraulic metal shear for sale is perfect for fabrication shops that mainly work with smaller gauges. Made from ground, polished steel plate, the SH-8014 14 gauge shear at full capacity all day long. Order this 14 gauge shear from Baileigh Industrial.
- 80” length.
- 14 gauge mild steel maximum capacity.
- Minimum capacity of 24 gauge mild steel.
- 3 hp motor runs on 220-volt 3-phase power.
- Up to 26 strokes per minute.
- Adjustable 24” backgauge ensures precise repeatability.
- Front support arms and table guides keep the material square to the blade.
- 3 modes on the operator console:
- Inch mode: Jog the control and ease the blade down to the material.
- Single mode: Make one cut cycle per foot pedal push.
- Auto mode: Continue cycling as you hold the pedal down.
- Comes standard with high carbon chromium blades.
- Blades have 4 shearing edges, so you can turn them when an edge gets dull to extend blade life and save money.
- Hydraulic hold-downs clamp the sheet solidly to the table, eliminating material lifting and improving blade life.
- Rigid, fully welded steel plate construction helps prevent flex and gives you many years of accuracy.
- Covered by a 1-year parts warranty.
Specs on the Compact Hydraulic Shear Sh-8014
| Item Number | SH-8014 |
|---|---|
| Back Gauge Length | 24" |
| Shear Length | 80" |
| Motor | 3 hp |
| Thickness (SS) | 14 ga. (18 ga.) |
| Strokes Per Minute | 26 |
| Front Gauge Length | 24" |
| Blade Angle | 1° |
| Power | 220V / 3-phase |
| Shipping Weight | 3700lbs |
| Minimum Material Thickness | 24ga |
| Shipping Dimensions (Inches) | 106x37x57 |
* specifications subject to change without notice.
