Pneumatic Anchor Machine
Product Code: APAM
General
The Pneumatic Anchor Machine manufactured by Aardwolf Industries LLC features pneumatic grinders and a vacuum-powered base. It is used to cut T-slots in the back of vanity tops for the attachment of anchor bolts used in under-counter sink or architectural facing systems. Two separate vacuum zones on the base can be turned on or off, enabling the machine to be used near edges.
Features
- Industrial quick-couplers for both air and water
- Combination port that allows vacuum to be applied with compressed air via the built-in venturi vacuum generator
- The grinders accept any T diamond bit with a 6mm shank
- Water hose with ball valve and quick-coupler can be quickly detached and used to spray work area
- Machine cuts in both push and pull directions
- Alignment indicators on machine base
- Machined, anodized aluminium components
- Moulded rubber vacuum base seal
Specifications
| Metric (mm-kg) | Imperial (inch-lb) | |
| Net weight | 3 | 6.6 |
| Collet diameter | 6 | 0.2'' |
| No load speed 25,000 RPM | ||
| Water connection hose thread- 1/4" PT | ||
| Air connection 1/4" industrial series coupler plug | ||
| Vacuum base -80 kPa vacuum |