SpecPoxy 3000 is a two-component, moisture insensitive, high modulus, structural epoxy bonding gel. Case comes with a nozzle for easy application.
Call for discount on bulk purchases (+1 (800) 342-3876)
SpecPoxy 3000 is 100% solids, solvent free, low odor, high-strength, and non-sag. VOC content= 0 grams/liter.
Application
- Anchoring bolts, dowels, and reinforcing steel.
- Vertical and overhead structural bonding and patching.
- Sealing cracks and setting injection ports.
- Suitable for use in concrete, block, brick, or stone.
Mixing Instructions
- Mix equal volumes of Part A and Part B for three minutes using a low-speed drill.
- Air, material, and surface temperatures must be at least 60°F prior to mixing and installation.
Surface Preparation
- Surfaces must be clean and structurally sound.
- Remove contaminants by sandblasting, mechanical abrasion, or hydro blasting.
- Ensure drilled holes are prepared by brushing and blowing out with oil-free compressed air.
Application Techniques
- Bonding: Apply SpecPoxy 3000 neatly into the substrate and ensure the glue line does not exceed 1/8″.
- Anchoring: For anchoring applications, ensure holes are drilled to the appropriate depth and diameter, and filled from the bottom up to avoid air pockets.
Shelf Life
- Store in original, tightly closed containers. Shelf life is two years from the date of manufacture when stored properly.
Test Data
- Initial Cure: 24 hours
- Final Cure: 7 days
- Compressive Strength (ASTM D695): 11,230 psi
- Compressive Modulus (ASTM D695): 326,500 psi
- Bond Strength (ASTM 882): 2 days – 2,460 psi; 14 days – 3,280 psi
- Elongation (ASTM D638): 1.3%
- Tensile Strength (ASTM D638): 7,210 psi
- Water Absorption (ASTM D570): <0.5%
- Heat Deflection (ASTM D648): 133°F
- Mix Ratio: 1 to 1
- Viscosity: Gel/Paste