Tile Cleaner & Porcelain Stain Remover
Booster is a multipurpose tile and hard surface cleansing product that can be used for a variety of cleaning tasks. It can be used as a stain remover (full strength) on specific materials or as a cleaner (diluted). Booster Tile Cleaner can be mixed for use in removing the following discolorations on hard surfaces:
- Stubborn Organic Dirt
- Rubber Marks
- Waxes
- Epoxy Residue
GENERAL PURPOSE CLEANING
Booster can be used as a high powered cleaner on a variety of materials. When it is diluted to the proper strength, it can be used to clean stubborn dirt and grime from the following surfaces:
- Ceramic
- Porcelain
- Unpolished Stone
- Glazed Ceramic
- Cement
- PVC
- Granite
- Unpolished Marble
- Non-glossy Cement Agglomeration
To use Booster as a power cleansing agent, simply follow these instructions:
- Mix 1 part Booster with 20 parts water.
- Apply the mixture to the surface to be cleaned.
- Leave mixture on surface for 5-10 minutes.
- Work the mixture using a brush while wearing hand protection.
- Rinse the surface thoroughly to remove all Booster.
CAUTION:
When using Booster as a Tile Cleaner, be sure to wear appropriate hand protection. Additionally, for stubborn stains higher strength mixtures can be used. If you need to use a stronger mix, be sure to test it in an inconspicuous location before using. Tile cleaner to water ratios include:
BOOSTER:WATER MIX RATIOS
- 1:20 = Standard Ratio (Recommended)
- 1:10 = Tougher Dirts Ratio
- 1:5 = Stubborn Dirts Ratio
PORCELAIN STAIN REMOVAL
Booster tile cleaner and porcelain stain remover can be used to remove stains from porcelain stoneware. To use Booster as a porcelain stoneware stain remover apply as follows:
- Apply undiluted Booster to the porcelain sotneware using a small brush or a paint brush.
- Allow the Booster to sit on the area for approximately 10 minutes.
- Use a scrub brush in order to scrub away residues.
- Rinse thoroughly with water.
- For particularly stubborn stains, cover the stain with plastic and leave covered for several hours on epoxy residues.
SAFETY RULES:
Read the information on the safety data sheet and the instructions on the package/can before use.
WARNINGS:
- Keep out of the reach of children.
- Avoid contact with the eyes and skin.
- Do not mix with other substances.
- Do not use as a cleaner for waxed and glossy surfaces.
SHELF LIFE:
The product will last at least 12 months in normal condition, kept away from heat, humidity and sunlight. Close the package after usage.
