Cure & Seal 25 EX

Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

Application

Apply Cure & Seal 25 EX only to surfaces that are not hot or directly exposed to sunlight to avoid improper film formation, bubbling, peeling, or blushing. For best results, maintain high pressure in pump-up sprayers and keep the spray tip close to the surface, within 12 inches.

Specific Applications:

• New Concrete: Apply Cure & Seal 25 EX once the surface water has dissipated and without marring the surface, followed by a second coat for enhanced finish and protection at 400 sq ft/gal.
• Existing Concrete: Surfaces must be clean, dry or damp, and free of stains, oils, grease, dirt, and incompatible coatings. Cure & Seal 25 EX revitalizes concrete, brick, or terrazzo floors, making them brighter and easier to maintain.

Packaging

Available in 55-gallon drums and 5-gallon pails.

Shelf Life

Two-year shelf life in original, tightly closed containers. Avoid contamination.

Coverage

• Coverage varies by application, generally between:
  • Curing: 300-400 sq ft/gal
  • Dustproofing and Sealing: 400-600 sq ft/gal
  • Aged Concrete: 400-600 sq ft/gal
• For dustproofing and sealing, apply two coats at 500 sq ft/gal. Coverage rates may double on rough or broom-finished surfaces, depending on concrete porosity and condition.

Standards

VOC content is under 350g/l, complying with Federal AIM rule VOC requirements and standards in OTC/LADCO/MRPO regions. Meets ASTM C1315 Class A and ASTM C309, Type 1, Classes A&B.