MB ZERO+ Marble Polishing Powder

Achieve a Brilliant Shine – With Zero Oxalic Acid

MB ZERO+ is a high-performance marble polishing powder that delivers superior clarity and shine while being less aggressive than traditional powders. Specially formulated for calcite-based stones, it excels on sensitive or hard-to-polish surfaces like white, black, and brown marbles as well as serpentines.

With a fine talc-like consistency, MB ZERO+ creates a tremendously high gloss finish without the use of oxalic acid.

Coverage:

• Countertops: ~125-200 sq. ft. per pound
• Floors: ~10-12 sq. ft. per 2 oz

Directions for Use:

Preparation:
✔ Mask off surrounding surfaces to prevent splatters.
✔ Wear safety glasses and gloves.
✔ Ensure the surface is free of coatings, waxes, sealers, grease, or soil.
✔ Hone the surface if needed using quality diamonds to maximize clarity.

Polishing Process:

1. Apply MB ZERO+ Powder

   • Counters: Use 1 tsp per 2-3 sq. ft.
   • Floors: Use 2 oz per 10-12 sq. ft.
   • Add just enough water to form a thick, non-splattering paste.

2. Polish the Surface

   • Counters: Spread the paste with a low-speed machine and hog’s hair or white pad. Apply light, even pressure, polishing 1 min per sq. ft.
   • Floors: Add 5 seconds of water, then run the machine over the area for 3-4 minutes.

3. Check Results & Repeat if Needed

   • For extra luster, polish for an additional minute.
   • On counters, try a wet-to-dry polishing technique for enhanced shine.

Pro Tip:

For tight spaces, edges, and around fixtures, use a white pad cut ½ inch larger than the pad driver for added protection.

Experience effortless polishing and long-lasting shine with MB ZERO+!