Cobble Loc

SKU# 131-1G

$95⁶⁴ ~~$105⁹⁵~~

Shipping calculated at checkout.

Size

Gallon (Makes 2 Gallons) 2.5-Gallon Kit (Makes 5 Gallons) 5 Gallon (Makes 10 Gallons)

Product variants

Safe & Secure Payments.

Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

Cobble Loc is the newest technology in waterborne protection for concrete pavers, natural stone, stamped concrete, concrete surfaces and our TD One Step.

Surfacelogix Cobble Loc is two-part, water based clear sealer designed to enhance and protect concrete pavers, natural stone, stamped concrete, and other concrete surfaces. Cobble Loc achieves an enhanced appearance like traditional solvent-based sealers, in an eco-friendly, low-VOC formulation. Cobble Loc protects surfaces, provides chemical resistance, locks down joint sands, and inhibits weed growth and anthills. Cobble Loc is available in multiple finishes and with or without a nonslip grip additive.

Cobble Loc is a concentrated two-part formula sold as a kit that requires mixing and dilution. A 1-gallon kit makes 2 gallons of sealer, 2.5-gallon kits makes 5 gallons, and 5-gallon kit makes 10 gallons.

FOR PROFESSIONAL USE ONLY

Product Directions

Surfaces must be clean and free of any contaminants before sealing. Concrete should cure a minimum of 28 days before sealing. On smoothly troweled concrete, an acid etch is recommend using muriatic acid.

Cobble Loc contains a part A and part B that must be mixed together. On pavers, dilute with one part water to one-part mixed sealer and apply with roller or sprayer.

For best results, it is recommended to mechanically mix with a power mixer for a minimum of 2 - 5 minutes. Apply a uniform coat heavy enough to wet out joints if sand stabilization is desired. A second coat of sealer may be appropriate depending on the porosity of the substrate.

The 2nd coat can be applied after 4-6 hours of dry time. As a topcoat over Coloron, Colorcrete or TD One Step apply a uniform coat undiluted by water. To avoid buildup of sealer, do not apply Cobble Loc more than once every 2 years.

READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT.

COBBLE LOC IS NOT RECOMMENDED ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE.

FOR PROFESSIONAL USE ONLY

Features

Water based sealer for concrete pavers, natural stone and concrete surfaces
Eco-friendly and low VOCs (less than 50g/l)
Pressure clean and seal bricks same day
Semi-gloss paver sealer gives same wet look and enhancement as solvent based sealers
Provides water and tire marking resistance
May be applied over damp surfaces
Helps lock down joint sand
Inhibits weed growth and anthills
Catalyzed product that provides chemical resistance to gasoline and oil leakage
Excellent paver sealer and protectant from various stains

Applications

Clear protective coating for concrete pavers and surfaces
Preserves and protects travertine, natural stone and most porous surfaces
Excellent topcoat over Colorcrete, Coloron, and TD One Step
Provides chemical protection against brake fluid, gasoline, bleach and acids
Protects concrete tile roofs
Used in paver repair and maintenance
Applied after concrete stamps utilization to produce natural and realistic results

Cobble Loc Technical Sheet

This stuff is magical

It is so easy to use and left my driveway the envy of the neighborhood!

Vendors were charging $900 per driveway.

We bought a $100 sprayer and a 5 gallon container of Cobble Loc and then coated two driveways for a total cost of about $450 and saved ourselves $1,350!!!!!!

The Best sealer/stripper

Do not hesitate to use this product. It is hands down the best brand available. 20yr old pavers stripped and sealed and now they look like new pavers!!